상품상세 정보
Deadlength Collets
| 판매가 | 견적 요청 |
|---|---|
| 할인판매가 | ( 0원 할인) |
| 할인금액 | 총 할인금액 원 (모바일할인금액 원) |
| 적립금 | |
| 제휴적립금 | |
| 배송방법 | 택배 |
| 배송비 | 5,000원 (100,000원 이상 구매 시 무료) |
| 상품 추가설명 번역정보 |
| 구매방법 | |
|---|---|
|
배송주기
정기배송 할인 save
|
|
| 배송 | |
|---|---|
| 수량 |
|
| 상품 정보 | 가격 | 삭제 |
|---|
총상품금액(수량) 0
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
Use:
for workpiece clamping
for bar or chuck work
no axial movement while the chuck is clamping
Bore patterns:
(G): smooth
(Q): with round grooves from 6.0 mm
(LQ): with cross grooves from 6.0 mm, serrated in the case of round bores greater than 9.0 mm; higher clamping force
(Q): with round grooves from 6.0 mm
(LQ): with cross grooves from 6.0 mm, serrated in the case of round bores greater than 9.0 mm; higher clamping force
Taper angle of the clamping sleeve:
The taper of the clamping sleeve should be 15‘ (one-sided) flatter than the taper angles given in the tables. This frees the collets on release and provides low undersized clamping.
Stepped bores:
In the case of stepped bores or when using collet stops, the clamping point should be within the taper of the collet, otherwise the collet will tend to break due to bending stresses.
Hardness:
The collets are made from special spring steel. Where possible, by partial tempering, the hardness of the taper and clamping bore is approx. HRc 60. The shank and sprung area are hardened to spring.
Taper grinding:
The clamping taper is lightly ground at the slot edges to ease removal of the collets from the mounting thus making possible low undersized clamping.
Stops for collets:
Adjustable stops which are easily fitted into the rear bore of the collets. Bores are available for standard models.
| 상품명 | Deadlength Collets |
|---|---|
| 판매가 | 견적 요청 |
| 국내·해외배송 | 국내배송 |
| 배송방법 | 택배 |
| 배송비 | 5,000원 (100,000원 이상 구매 시 무료) |
결제 안내
배송 안내
- 배송 방법 : 택배
- 배송 지역 : 전국지역
- 배송 비용 : 5,000원
- 배송 기간 : 3일 ~ 7일
- 배송 안내 :